Valvetronic Designs SHUTO™ Catback Exhaust for Subaru BRZ / Toyota GR86 / 86 / Scion FR-S
$2,605.00
Skip to product information
SKU:
SUB.BRZ.VSES.BR.RC
In stock
Valvetronic Designs SHUTO™ Catback Exhaust for Subaru BRZ / Toyota GR86 / 86 / Scion FR-S
Free Shipping to the 48 Contiguous States
$2,605.00
Valvetronic Designs SHUTO™ Catback Exhaust for BRZ / GR86 / 86 / FR -S
T304 Stainless Steel • Brushed Finish • Electronic Valve Control
Overview
The BRZ, GR86, and FR-S are some of the purest driver's cars on the road — lightweight, balanced, and built to be driven hard. But the factory exhaust leaves the boxer engine sounding muted and uninspired. The Valvetronic Designs Valved Catback Exhaust System gives these cars the voice they deserve, with complete control over your sound at the push of a button.
With the valve open, exhaust flows with minimal restriction for a raw, motorsport-inspired boxer tone. Close the valve, and gases are routed through our Valvetronic-branded rear muffler for a refined, subdued sound that's perfect for daily driving and early mornings.
Sound & Control
- Valve Open: An aggressive, track-inspired boxer note with sharper throttle response and a stronger top end.
- Valve Closed: A refined, subdued tone for city driving, highway cruising, and late-night starts.
- Electronic Valve Control: Switch modes instantly with the included wireless remotes. No vacuum lines required.
Performance & Engineering
- T304 Stainless Steel Construction: Built for strength, durability, and long-lasting performance.
- Resonated Mid-Pipe: Smooths out the boxer tone and helps reduce drone at cruising speeds.
- Mandrel-Bent Tubing: Ensures smooth, unrestricted exhaust flow for maximum performance.
- Precision TIG Welds: High-strength craftsmanship that delivers both durability and aesthetics.
- Direct Bolt-On Installation: Uses factory mounting locations for straightforward fitment.
Visual Design
- Brushed Stainless Finish: A clean, OEM+ look with dual-exit tips that complement the rear styling of the BRZ, GR86, and FR-S.
- Refined Craftsmanship: Every weld and bend is designed to not only perform, but also impress.
Fitment
- 2012–2026 Subaru BRZ
- 2012–2015 Scion FR-S
- 2016–2021 Toyota 86
- 2022-2026 Toyota GR86
📩 Questions or fitment confirmation? customerservice@valvetronic.com
The perfect driver's car finally has the sound to match.
Electronic Valves: Switch between a quiet, refined cruise and an aggressive open tone at the push of a button, T304 Stainless Steel: Corrosion resistant, precision TIG welded construction, Remote Control: Two key fob remotes included
- Brushed T304 stainless steel
- Mandrel-bent tubing with precision TIG welds for smooth, unrestricted flow
- Electronic valves with rapid open/close response for quiet or aggressive modes
- Valvetronic valve controller with two key fob remotes and 12V plug-in power
- Single rear muffler; reuses the factory OEM exhaust tips
Add install guide content or connect a dynamic source
Warranty Coverage
All products manufactured by Valvetronic Designs are guaranteed to be free from manufacturing defects in materials and workmanship at the time of sale. A manufacturing defect is defined as any characteristic of the product that arises during the manufacturing process which impairs its usability for the purposes for which it was designed and manufactured.
Products are guaranteed to fit and function as designed on their intended vehicle application, provided the vehicle has not been modified or incurred structural damage. Sound or tone is not a warrantable or returnable issue, as exhaust sound is subjective and not considered a defect.
Warranty Periods
- 304 stainless steel and titanium exhaust tubes and welds carry a Lifetime of Ownership limited warranty against defects in workmanship or material, including penetrating rust.
- Mufflers and resonators carry a 3-year limited warranty against defects in workmanship or material, including penetrating rust.
- Catalysts are warranted to conform to EPA emission testing and OBDII compatibility criteria for 25,000 miles from the date of installation, whichever occurs first.
- Catalytic converter external shells, including end pipes, are warranted against corrosion and defective welding for 5 years or 50,000 miles from the date of installation, whichever occurs first.
- Vacuum pots, electronic remotes, and mechanical valves are covered by a 1-year limited warranty.
- Electronics, including 12V vacuum pumps, RF modules, and controllers, are covered by a 1-year limited warranty.
- Tip finish is covered by a 1-year limited warranty.
Warranty Terms
- Warranty coverage begins on the purchase date and applies only to the original purchaser.
- This warranty is not transferable or assignable at any time.
- Discoloration caused by heat, salt, brine, or other road treatments is not covered.
- Tip finish discoloration or damage caused by heat, chemicals, lack of maintenance, road salt, brine, other road treatments, road debris, or misuse is not covered.
Add fitment content or connect a dynamic source
Valved T304 stainless steel catback exhaust with single muffler, Valvetronic electronic valve control kit (controller, 2 key fob remotes, wiring harnesses, 12V power plug), Gaskets and mounting hardware
